GIBSON FALCON 5 7-WATT 1 X 10-INCH TUBE COMBO AMPLIFIER
GIBSON FALCON 5 7-WATT 1 X 10-INCH TUBE COMBO AMPLIFIER
GIBSON FALCON 5 7-WATT 1 X 10-INCH TUBE COMBO AMPLIFIER

Gibson

GIBSON FALCON 5 7-WATT 1 X 10-INCH TUBE COMBO AMPLIFIER

Sale priceRM7,999.00 MYR Regular priceRM9,410.00 MYR
On Request
SKU: 1-FA5-CO-J10
Pickup currently unavailable at The Starhill , Gibson Guitar Avenue

GIBSON FALCON 5 7-WATT 1 X 10-INCH TUBE COMBO AMPLIFIER

The Starhill , Gibson Guitar Avenue

Pickup currently unavailable

UG24, Starhill Gallery
55100 Bukit Bintang KUL
Malaysia

+60102189421

Vintage Tone… Reimagined!

Gibson is proud to introduce the new Falcon 5 1x10 Combo amplifier. It pays homage to Gibson’s legendary past as one of the world’s first manufacturers of electric guitar amplifiers. While inspired by the iconic Gibson Skylark amps from the 1950s and 1960s, this all-new design from renowned amp pioneer Randall Smith and the MESA/Boogie Design Team is handcrafted in Petaluma, California, and delivers vintage tone, reimagined and sets a new bar in tiny amp tone. The Falcon 5 is equipped with all the constructional upgrades and tonal improvements unearthed over Randall’s five decades of tube-amp design that deliver nothing less than astonishing results.


The Falcon 5 features single-channel simplicity with a focus on great tone and ease of use. The ultra-simple, pure signal path design has controls consisting of Volume and Tone, plus the addition of Reverb – an uncommon but welcome feature on a tube amp in this compact size and wattage class, adds dimensionality and immensely increases the amp’s enjoyment and usefulness over a wide range of musical styles.

Players in the know have long understood that one of the secrets to great overdriven tone is power amp overdrive, and lower-powered amps are key to turning up and achieving that cranked power amp sound without overwhelming volume levels. The Gibson Falcon 5 1x10 Combo is ideal for those demanding touch-sensitive, nuanced response at the low end of the gain and power spectrum, with a harmonically rich blend of vintage power-amp overdrive when turned up. All this vintage-flavored magic is brought to life via the unique mid-enhanced voice from a 10” Jensen® Blackbird 40 Alnico speaker, which perfectly complements the volume range and single-ended Class A power section. The power section is enhanced with a built-in Power Attenuator, allowing players to choose between Full and Low power settings, providing even more ways to transition in and out of clip seamlessly and musically and making the Falcon 5 an ideal amp for intimate gigs, home practice, and recording purposes. With its modern refinements, high-end performance, and boutique construction, the Falcon 5 is a vintage amp dream delivered with a sturdy, consistent modern design ethos.


  • Handcrafted in Petaluma, California

  • All-Tube Amplifier: 1x 6V6 (or 6L6) Power Tube / 3x 12AX7 Preamp Tubes

  • Single-Ended, Pure Class A Power

  • Wattage Select Switch – Choose from Full Power (approximately 7 watts) or Low Power (approx. 3 watts) with stock 6V6 Power Tube (approx. 8 watts / 4 watts with optional 6L6 Power Tube)

  • Cathode Biased, Maintenance-Free

  • Single Channel Simplicity – Channel Features: Normal & Low (Cleaner) Inputs, Volume, Tone, & Reverb Controls

  • All-Tube Spring Reverb

  • Monitor (Slave) DI Output – Fixed Attenuated from the Speaker Output

  • Polished Stainless Steel Control Faceplate

  • Aluminum Chassis

  • Slip Cover Included

  • 10” Jensen Blackbird 40 Alnico Speaker

SPECIFICATIONS

QUICK OVERVIEW

Wattage
Full (approximately 7 watts) or Low Power (approx. 3 watts) with Stock 6V6 Power Tube (Approx. 8 watts / 4 watts with optional 6L6 Power Tube)
Channels & Modes
1 Channel / 2 Modes (Normal or Low)
Channels/Inputs
Normal & Low Inputs - NORMAL = Clean to Overdrive, LOW = Cleaner
Mode Voicings styles
Single Channel with two Inputs: Normal Input = Clean to Overdrive Low Input = Cleaner
Graphic Eq Reverb Fx Solo
Reverb
Speakers Impedance
1 - 10" 8 Ohm Jensen Blackbird ALNICO 40 / Total Load = 8 Ohms
Weight
26 lbs. (11.79 kg.)
Dimensions
16 1/8” (40.96 cm) H x 16” (40.64 cm) W x 8 7/8” (22.54 cm) D (Height measurement includes rubber feet and the top of the handle in its flat position)

AMP FEATURES

Amp Type
Tube
Rectifier Type
Silicon Diodes
Preamp Tubes
3x 12AX7
Power Amp Tubes
1x 6V6 (or optional 1x 6L6)
Maintenance Free Fixed Bias
Cathode Biased, which is also Maintenance Free
Wattages Quick Reference
Full (approximately 7 watts) or Low Power (approx. 3 watts) with Stock 6V6 Power Tube (Approx. 8 watts / 4 watts with optional 6L6 Power Tube) - See Power Amp Details for more information
Built In Power Amp Attenuation
Yes – 2-Way Attenuator Switch provides Full or Low Power operation
Power Amp Details Class Wattage
Class A Power with selectable, global Full/Low Power Attenuator Switch - Provides two power options: Choose from Full Power (approximately 7 watts) or Low Power (approx. 3 watts) with Stock 6V6 Power Tube (Approx. 8 watts / 4 watts with optional 6L6 Power Tube)
Channel Controls
Volume, Tone, and Reverb Controls
Reverb Effects Bypass Options
All-Tube Spring Reverb
Speaker Outputs
One 8 Ohm and Two 4 Ohm
Slave Output
Yes - Fixed-Attenuated "MONITOR" Output from the Speaker Output

ACCESSORIES

Slip Cover
Included - Fitted Slipcover

CABINET FEATURES

Cabinet Material
Marine Grade, Baltic Birch
Standard Finish Options (No Extra Cost)
Cream Bronco Vinyl with Oxblood Grille
Speakers Impedance
1 - 8 Ohm Jensen Blackbird ALNICO 40 / Total Load = 8 Ohms
Extra Features
Vintage-Inspired Construction for Tone & Portability

WEIGHTS AND DIMS

Weight
26 lbs. (11.79 kg.)
Height
16 1/8” (40.96 cm) (Height measurement includes rubber feet and the top of the handle in its flat position)
Width
16" (40.64 cm)
Depth
8 7/8” (22.54 cm)